Typical Application
| Engineering |
Automobile |
| Textile |
Paper / Sugar Mills |
| Material Handling Equipments |
Bottling & Food |
| Railways |
Processing |
| Engineering |
Automobile |
| Textile |
Paper / Sugar Mills |
| Material Handling Equipments |
Bottling & Food |
| Railways |
Processin |
Specifications
Sheet: Thickness – 1mm-15mm
Thick Sheets: 20mm -150mm
Sizes : 1mt x 2mt, 1.22mt x 2.44mt, 1.2mt x 2mt, 1.5mt x 3mt
Rod: Dia x Length- 16-400mm X 1000mm
Square & Profiles: 16mm x 16mm – 150mm x 150mm
Products
Sheets | Rods | Thick Boards | PP Gl Sheets | Ortho Sheets | Square & Profiles
Mechanical Properties
| Performance and test conditions |
Test Method |
Unit |
Typical Values |
| Notched impact strength of cantilever beam, 23°C |
ASTM D256 |
J/m |
35 |
| Yield tensile strength, 23°C, 50mm/min |
ASTM D638 |
Mpa |
29 |
| Elongation at break, 23°C, 50mm/min |
ASTM D638 |
% |
300 |
| The bending strength. 23C, 2mm/min |
ASTM 790 |
Mpa |
35 |
| Bending modulus, 23°C, 2mm/min |
ASTM 790 |
Mpa |
1030 |
| Shore hardness D |
ASTMD2240 |
– |
80 |
| The Density |
ISO 1183 |
g/cm3 |
0.910 |
Thermal Performance
| Performance and test conditions |
Test Method |
Unit |
Typical Values |
| Thermal deformation temprature(HDT) (0.45Mpa) |
ISO 75 |
°C |
83 |
| Melting Point |
– |
°C |
170 |
| Long term operating temperature |
– |
°C |
95 |
| Short-term operating temperature |
– |
°C |
120 |
| Thermal conductivity |
DIN 52612-1 |
W/(K-M) |
– |
| Linear expansion coefficient |
ASTM D696 |
10-5-1/K |
15 |
Electrical Performance
| Performance and test conditions |
Test Method |
Unit |
Typical Values |
| Dielectric strength |
ASTM D150 |
KV-mm |
40 |
| Dielectric loss coefficient |
ASTM D150 |
– |
– |
| The volume resistance |
ASTM D257 |
Ω.cm |
1014 |
| The surface resistance |
ASTM D257 |
Ω |
1016 |
| Dielectric constant |
ASTM D149 |
– |
2.3 |
