Features
- High Mechanical Strength
- Wear Resistance
- Creep Resistance
- Mechanical Shock Absorption
Specifications
Sheet: Thickness x Width x Length
6-150mm x 1000mm x 2000mm
Rod: diameter x length
16-400mm x 1000mm
Products
Mos2 Rods | Oilon Rods | Square Rods | Cast Nylon | Slipper Pads
| Performance and test conditions |
Test Method |
Unit |
Typical Values |
| Notched impact strength of cantilever beam, 23°C |
ASTM D256 |
KJ/m² |
8 |
| Yield tensile strength, 23°C, 50mm/min |
ASTM D638 |
Mpa |
75 |
| Elongation at break, 23°C, 50mm/min |
ASTM D638 |
% |
5 |
| The bending strength. 23C, 2mm/min |
ASTM 790 |
Mpa |
90 |
| Bending modulus, 23°C, 2mm/min |
ASTM 790 |
Mpa |
2200 |
| Shore hardness D |
ASTMD2240 |
– |
80 |
| The Density |
ISO 1183 |
g/cm3 |
1.13 |
Thermal Performance
| Performance and test conditions |
Test Method |
Unit |
Typical Values |
| Thermal deformation temprature(HDT) (0.45Mpa) |
ISO 75 |
°C |
70 |
| Melting Point |
– |
°C |
220 |
| Long term operating temperature |
– |
°C |
80 |
| Short-term operating temperature |
– |
°C |
110 |
| Thermal conductivity |
DIN 52612-1 |
W/(K-M) |
0.23 |
| Linear expansion coefficient |
ASTM D696 |
10-5-1/K |
8 |
Electrical Performance
| Performance and test conditions |
Test Method |
Unit |
Typical Values |
| Dielectric strength |
ASTM D150 |
KV-mm |
25 |
| Dielectric loss coefficient |
ASTM D150 |
– |
0.032 |
| The volume resistance |
ASTM D257 |
Ω.cm |
1015 |
| The surface resistance |
ASTM D257 |
Ω |
1015 |
| Dielectric constant |
ASTM D149 |
– |
4.2 |
